Drywall Repair

Drywall Repair Basics

Small holes from picture frame nails or doorknobs are an easy DIY fix. Anyone can make this repair quickly and efficiently with a patch kit, spackle or joint compound (aka mud), and a putty knife.Drywall Repair

Larger dents or holes require mesh drywall tape to reinforce the repair and prevent future shifting. This is a good time to identify wall studs, which will help with other repairs later on. However, if you need help from experts, contact Drywall Repair Las Vegas now!

The drywall is very strong but can still crack if it’s not properly installed or subjected to stress. Cracks are usually found on the seam where two sheets meet. Normally this type of crack is cosmetic and easily repaired.

When a drywall sheet meets another, it gets sealed with paper tape to prevent water and other materials from seeping through the joints. Over time the tape can pull away from the drywall and create a small crack. If left unchecked the crack can widen and could eventually cause the drywall to collapse.

To repair a drywall crack, remove any loose material in the area and apply an appropriate size patch to the wall surface using a putty knife. Then, use an electronic stud finder to locate the studs on either side of the damaged area. Remove the damaged drywall, taking care not to cut into the studs.

If you’re repairing a corner, start by removing the metal edge strip called a “corner bead.” This can be done with a power saw or by hand. This is because a lot of things can dent drywall corners—from running the vacuum cleaner to a kid flinging a toy. Once the corner bead is removed, use a putty knife to spread a skim coat of joint compound over the bare spot. Let it dry, then sand it smooth.

Cracks that appear vertically near doors and windows are usually caused by settling in the house frame. This is normal, but if the cracks continue to grow it’s a sign of structural damage and should be checked by an experienced contractor.

Nail pops, or nail heads pulling away from the studs, are fairly common in new homes and can be fixed with a little joint compound. It’s important to fix them before they get out of hand because the nails hold drywall together and if they come apart it can make the drywall weak and more likely to crack.

If the crack is very shallow, use an electric sander to smooth the wall surface, then apply several skim coats of compound and sand each one smooth. This will make the crack less noticeable once it’s sanded and painted.


Holes in drywall are a common problem that can be caused by anything from a cat or dog scratching or gnawing at a wall to rodents or insects burrowing through the surface. They can also be caused by a nail or screw that’s come loose, creating a hole that needs to be fixed before it becomes larger and creates additional damage in the area.

Small holes can be repaired with spackle or joint compound (ask your local hardware store what’s best for you), a putty knife and a sanding block. Anything bigger than a nail hole requires the use of mesh drywall tape as well, which can add strength to the patch and help prevent cracking in the future.

If you’re dealing with a large hole, the first step is to make sure that no electrical or plumbing lines are running through it. Shine a flashlight into the hole to see if there are any wires or pipes.

After ensuring that there are no hidden wires or pipes in the wall, cut out the section of drywall surrounding the hole using a utility knife. This will give you a clean edge to work with when repairing the hole.

A stud finder can help you locate the studs on either side of the hole, which will give you a guide for how large to cut the section of drywall. Once you’ve removed the section of drywall, screw in wooden boards to act as supports at the top and bottom of the hole, like you would when framing out a wall.

The next step is to cut a piece of drywall that’s about twice the size of the hole, then place it over the holes and trace the outline of the old drywall onto the backside. Carefully cut along the lines you’ve drawn with a utility knife, being careful not to cut through the front paper.

Once the new drywall patch is in place, apply several thin coats of joint compound to the entire area and sand in between each one. This will give the patch a smooth finish that will blend in with the rest of the wall. Once the patch is completely dry, you can paint over it to match the color of the rest of your walls.


If your drywall is stained, it’s important to repair the stain before painting. This will give you a better looking finished product. Stains on drywall are usually caused by water damage, mold or mildew. These problems need to be addressed as soon as possible, to prevent further damage. A professional can assess the situation and perform any necessary repairs.

If you have a light stain on your drywall, you may be able to clean it up with a mild cleaning solution and water. However, if the stain is more serious and dark, it will likely require a professional. Dark stains are typically signs of long-standing moisture and can lead to mold or mildew growth. It’s important to repair these stains as quickly as possible, as they can be very hazardous to your health and will also affect the air quality in your home or office.

Drywall Cracks

Cracks in drywall can be caused by many things, including changes in temperature and humidity, settling of the building or poor installation techniques. In most cases, cracks can be patched by using a joint compound. The cracks should then be sanded and primed to seal the repaired area.


Holes in drywall can be caused by many things, such as accidents or the removal of fixtures or hardware. In most cases, holes in drywall can be patched by using a patch from another piece of drywall. The patch should then be nailed into place, sanded and then primed to seal the repaired area.


If you have a light stain on the surface of your drywall, it’s important to repair the stain prior to painting. This will give you a better finished product and will make the wall look more professional. If the stain is more serious, it will likely need to be removed and a new piece of drywall installed.


If moisture gets absorbed into drywall, it can lead to mold and mildew growth. This may cause a foul smell, and it also poses health risks for family members. Mold spores may be ingested, and some types of mold can even pose respiratory issues. It’s important to have this issue addressed as soon as possible.

Often, mold and water damage can be prevented by taking a few simple steps. First, you should address the source of the problem. This could be a leaking pipe, condensation from an air conditioning unit, or a sink overflow. Once you’ve fixed the problem, you should take measures to dry out the area. Opening doors and windows and using fans to circulate the air will help speed up the process. It’s also a good idea to use a dehumidifier, as this will lower the humidity and further help with drying out the affected areas.

Once the area is dry, you can patch any holes or cracks in the drywall. Make sure to use a high-quality drywall compound that is moisture resistant and stain blocking. It’s also a good idea for you to use a moisture-resistant primer on the entire wall, and be sure to follow all of the manufacturer’s instructions.

One final step to prevent future drywall problems is to add a layer of polyurethane foam to the surface of the wall. This will create a barrier that prevents moisture from entering the wall and can be especially effective in homes with high humidity.

Moisture is a huge culprit when it comes to drywall problems. Excessive humidity can cause the wood framing of a house to swell, paints to bubble or peel, and even drywall to crack or crumble. This is due to the water-soluble joint compound used on drywall, which deteriorates when exposed to excessive moisture. It’s important to have any moisture issues evaluated and resolved as soon as they occur, or they may result in irreversible damage to the home’s structural integrity. If left unchecked, a small moisture problem can easily turn into a large-scale drywall removal and replacement project.